PMF 2005-24 SD FRONT LIGHTWEIGHT RACE COILOVER TOWERS
PMF Front race coilover towers replace the heavy OEM coil buckets with a lightweight coilover tower. This is intended to pair with a QA1/Viking etc coilover. These come with lower mounts. These are setup for a 1/2" x 1.5" mounting width both top and bottom. Removal of the factory bucket is required.
These come in a bare steel finish. All grade 8 mounting hardware is included. As always, these are proudly manufactured here in the US!
THESE ARE A LIGHTWEIGHT RACE COMPONENT! THEY ARE NOT INTENDED FOR A FULL WEIGHT DAILY DRIVER BEATING DOWN A DIRT ROAD! As with any race car, design and engineering of the entire chassis must be done to ensure proper safety. Depending on weight and uses, additional bracing, engine cage, etc may be necessary to complete installation.
PMF IS NOT LIABLE FOR ANY DAMAGES, INJURY OR DEATH CAUSED BY THE USE OF THIS PRODUCT!
Product Information
Product Information
Shipping & Returns
Shipping & Returns
PMF 2005-24 SD FRONT LIGHTWEIGHT RACE COILOVER TOWERS
PMF 2005-24 SD FRONT LIGHTWEIGHT RACE COILOVER TOWERS
PMF Front race coilover towers replace the heavy OEM coil buckets with a lightweight coilover tower. This is intended to pair with a QA1/Viking etc coilover. These come with lower mounts. These are setup for a 1/2" x 1.5" mounting width both top and bottom. Removal of the factory bucket is required.
These come in a bare steel finish. All grade 8 mounting hardware is included. As always, these are proudly manufactured here in the US!
THESE ARE A LIGHTWEIGHT RACE COMPONENT! THEY ARE NOT INTENDED FOR A FULL WEIGHT DAILY DRIVER BEATING DOWN A DIRT ROAD! As with any race car, design and engineering of the entire chassis must be done to ensure proper safety. Depending on weight and uses, additional bracing, engine cage, etc may be necessary to complete installation.
PMF IS NOT LIABLE FOR ANY DAMAGES, INJURY OR DEATH CAUSED BY THE USE OF THIS PRODUCT!
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
PMF Front race coilover towers replace the heavy OEM coil buckets with a lightweight coilover tower. This is intended to pair with a QA1/Viking etc coilover. These come with lower mounts. These are setup for a 1/2" x 1.5" mounting width both top and bottom. Removal of the factory bucket is required.
These come in a bare steel finish. All grade 8 mounting hardware is included. As always, these are proudly manufactured here in the US!
THESE ARE A LIGHTWEIGHT RACE COMPONENT! THEY ARE NOT INTENDED FOR A FULL WEIGHT DAILY DRIVER BEATING DOWN A DIRT ROAD! As with any race car, design and engineering of the entire chassis must be done to ensure proper safety. Depending on weight and uses, additional bracing, engine cage, etc may be necessary to complete installation.
PMF IS NOT LIABLE FOR ANY DAMAGES, INJURY OR DEATH CAUSED BY THE USE OF THIS PRODUCT!
